Antivibration Dampers Silentblock – Cylindrical Dampers – HR
These antivibration dampers can be loaded in compression or shear, or a combination of both (never traction) for protection from severe vibrations, shocks and noises.
Cylindrical dampers consisting of two parallel metal plates bonded to a cylinder shaped rubber inset and of a twin inset threaded bobbins.
High quality natural rubber compounds are employed to produce this silentblock, and the mountings should not be exposed to hydrocarbons.
The mechanical characteristics of these antivibration dampers can differ due to the hardness tolerances of the elastomers.
| REF / ART.NR | DIMENSIONS | COMPRESSION | SHEAR | SELECTION GRAPHICS | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Sh | ØA | B | D | I | LOAD | DEFLECTION | LOAD | DEFLECTION | ||||
| mm. | kg. | mm. | kg. | mm. | ||||||||
| HR | HR1615 | 60 | 16 | 15 | M-05 | 5 | 15 | 2,5±0,5 | 2 | 2,0±0,5 |  | |
| HR1620 | 60 | 16 | 20 | M-05 | 5 | 15 | 3,5±0,5 | 2 | 4,0±0,5 | |||
| HR1625 | 60 | 16 | 25 | M-05 | 5 | 15 | 4,5±1,0 | 2 | 5,0±1,0 | |||
| HR2015 | 60 | 20 | 15 | M-06 | 5 | 40 | 2,0±0,5 | 3,5 | 3,0±0,5 | | ||
| HR2020 | 60 | 20 | 20 | M-06 | 5 | 30 | 4,0±1,0 | 2,5 | 4,0±0,5 | |||
| HR2025 | 60 | 20 | 25 | M-06 | 5 | 30 | 5,0±1,0 | 2,5 | 5,0±1,0 | |||
| HR2030 | 60 | 20 | 30 | M-06 | 5 | 25 | 6,0±1,0 | 2,5 | 6,0±1,0 | |||
| HR2520 | 50 | 25 | 20 | M-08 | 6 | 50 | 4,0±0,5 | 8 | 4,0±0,5 | | ||
| HR2525 | 50 | 25 | 25 | M-08 | 6 | 45 | 5,0±1,0 | 6 | 5,0±1,0 | |||
| HR2530 | 50 | 25 | 30 | M-08 | 6 | 40 | 6,0±1,0 | 5 | 6,0±1,0 | |||
| HR2540 | 50 | 25 | 40 | M-08 | 6 | 40 | 8,0±1,0 | 5 | 8,0±1,0 | |||
| HR2822 | 50 | 28 | 22 | M-08 | 6 | 60 | 4,5±1,0 | 11 | 5,0±1,0 | | ||
| HR3020 | 50 | 30 | 20 | M-08 | 6 | 80 | 4,0±0,5 | 11 | 4,0±0,5 | |||
| HR3030 | 50 | 30 | 30 | M-08 | 6 | 60 | 6,0±1,0 | 11 | 6,0±1,0 | |||
| HR3330 | 60 | 30 | 30 | M-08 | 6 | 80 | 6,0±1,0 | 16 | 6,0±1,0 | |||
| HR3040 | 50 | 30 | 40 | M-08 | 6 | 60 | 8,0±1,0 | 11 | 8,0±1,0 | |||
| HR4020 | 50 | 40 | 20 | M-10 | 7 | 175 | 4,0±0,5 | 20 | 4,0±0,5 | | ||
| HR4028M8 | 50 | 40 | 28 | M-08 | 6 | 125 | 5,5±1,0 | 16 | 5,5±1,0 | |||
| HR4028 | 50 | 40 | 28 | M-10 | 7 | 125 | 5,5±1,0 | 16 | 5,5±1,0 | |||
| HR3430 | 60 | 40 | 30 | M-08 | 6 | 200 | 6,0±1,0 | 40 | 6,0±1,0 | |||
| HR4035 | 50 | 40 | 35 | M-10 | 7 | 100 | 7,0±1,0 | 16 | 7,0±1,0 | |||
| HR4040M8 | 50 | 40 | 40 | M-08 | 6 | 100 | 8,0±1,0 | 16 | 8,0±1,0 | |||
| HR4040 | 50 | 40 | 40 | M-10 | 7 | 100 | 8,0±1,0 | 16 | 8,0±1,0 | |||
| HR4045M8 | 50 | 40 | 45 | M-08 | 6 | 100 | 9,0±1,0 | 16 | 9,0±1,0 | |||
| HR4045 | 50 | 40 | 45 | M-10 | 7 | 100 | 9,0±1,0 | 16 | 9,0±1,0 | |||
| HR5020 | 50 | 50 | 20 | M-10 | 7 | 300 | 4,0±0,5 | 25 | 4,0±0,5 | | ||
| HR5025 | 50 | 50 | 25 | M-10 | 7 | 175 | 5,0±1,0 | 25 | 5,0±1,0 | |||
| HR5030 | 50 | 50 | 30 | M-10 | 7 | 160 | 6,0±1,0 | 25 | 6,0±1,0 | |||
| HR5035 | 50 | 50 | 35 | M-10 | 7 | 160 | 7,0±1,0 | 25 | 7,0±1,0 | |||
| HR5040 | 50 | 50 | 40 | M-10 | 7 | 155 | 8,0±1,0 | 25 | 8,0±1,0 | |||
| HR5045 | 50 | 50 | 45 | M-10 | 7 | 150 | 9,0±1,0 | 25 | 9,0±1,0 | |||
| HR5060 | 50 | 50 | 60 | M-10 | 7 | 130 | 12,0±1,5 | 25 | 12,0±1,5 | |||
| HR6025 | 50 | 60 | 25 | M-10 | 7 | 400 | 5,0±1,0 | 35 | 5,0±1,0 | | ||
| HR6035 | 50 | 60 | 35 | M-10 | 7 | 300 | 7,0±1,0 | 35 | 7,0±1,0 | |||
| HR6045 | 50 | 60 | 45 | M-10 | 7 | 250 | 9,0±1,0 | 35 | 9,0±1,0 | |||
| HR6060 | 50 | 60 | 60 | M-10 | 7 | 225 | 12,0±1,5 | 35 | 11,0±1,5 | |||
| HR7035M10 | 50 | 70 | 35 | M-10 | 9 | 450 | 7,0±1,0 | 55 | 7,0±1,0 | | ||
| HR7040M10 | 50 | 70 | 40 | M-10 | 9 | 400 | 8,0±1,0 | 70 | 8,0±1,0 | |||
| HR7050M10 | 50 | 70 | 50 | M-10 | 9 | 300 | 10,0±1,0 | 35 | 10,0±1,0 | |||
| HR7070M10 | 50 | 70 | 70 | M-10 | 9 | 300 | 14,0±1,5 | 35 | 14,0±1,5 | |||
| HR7035 | 50 | 70 | 35 | M-12 | 10 | 450 | 7,0±1,0 | 55 | 7,0±1,0 | |||
| HR7040 | 50 | 70 | 40 | M-12 | 10 | 400 | 8,0±1,0 | 70 | 8,0±1,0 | |||
| HR7050 | 50 | 70 | 50 | M-12 | 10 | 300 | 10,0±1,0 | 35 | 10,0±1,0 | |||
| HR7070 | 50 | 70 | 70 | M-12 | 10 | 300 | 14,0±1,5 | 35 | 14,0±1,5 | |||
| HR8030 | 50 | 80 | 30 | M-14 | 9 | 950 | 6,0±1,0 | 100 | 6,0±1,0 | | ||
| HR8040 | 50 | 80 | 40 | M-14 | 9 | 600 | 8,0±1,0 | 80 | 8,0±1,0 | |||
| HR8055 | 50 | 80 | 55 | M-14 | 9 | 500 | 11,0±1,5 | 70 | 11,0±1,5 | |||
| HR9540 | 50 | 95 | 40 | M-16 | 14 | 1000 | 8,0±1,0 | 140 | 8,0±1,0 | |||
| HR102 | HR102D45 | 45 | 102 | 55 | M-16 | 14 | 500 | 11,0±1,5 | 100 | 11,0±1,5 | | |
| HR102D60 | 60 | 102 | 55 | M-16 | 14 | 1000 | 11,0±1,5 | 200 | 11,0±1,5 | |||
| HR102D75 | 75 | 102 | 55 | M-16 | 14 | 2500 | 11,0±1,5 | 350 | 11,0±1,5 | |||
| HR | HR15075 | 50 | 150 | 75 | M-20 | 20 | 1800 | 15,0±2,0 | 275 | 15,0±2,0 | | |
Polígono Industrial Lastaola, Parcela 3,
Naves A8-A11, 20120 Hernani (Gipuzkoa)
Tel: +34 943 335 350 · Fax: +34 943 335 291
Lesol, S.L., within the framework of the ICEX Next Program, has received support from ICEX and co-financing from the European FEDER fund.
The purpose of this support is to contribute to the international development of the company and its environment.
The purpose of this support is to contribute to the international development of the company and its environment.
European Regional Development Fund.
A way to make Europe.
